Manufacturer Specifications:

• Receiver Specifications
• Receiving Frequency:ISM 2400~2483Mhz
• Intermediate Frequency:480Mhz
• Frequency Stabilization:+/-100Khz
• Demodulation Mode:FM
• Antenna:50ohm SMA
• Video Output:1Vp-p@75,S/N>38dB
• Audio Output:1Vp-P@600
• Power Adapter:DC 12V/500mA
• Dimensions:120 x 99 x 30 mm (L x W x D)
• Manual or Remote Controlled
• Four Channels Available
• Channel Scan and Channel Skip for multiple Cameras

Camera Specifications :

• Image Device:1/3 Inch OmniVision CMOS
• TV system:NTSC 628(H)x568(V)
• Horizontal Definition:380TV Line
• Angular Field of View:45deg(f=6mm)
• Minimum Illumination:3.0Lux(F1.2)
• Synchronization System: Internal
• Scanning Freq(H):15.734KHz NTSC
• Scanning Freq(V):60Hz NTSC
• Backlight Compensation:Auto
• Electronic Shutter:1/50(1/60)~1/100,000sec
• White Balance:Auto
• S/N Ratio:>48dB
• Gamma Correction:>0.45
• Operation Temperature:-10~50 deg C
• Transmission Frequency:ISM 2,400~2483MHz
• Locked Frequencies
• Power Adapter:DC8V/500mA
• Dimensions:40 x 35 x 35 mm (L x W x D)
• Recommended Range for Objects:1-8M. Max effective range 10M.
• Transmission Range:20 meters without interference

Package Contents for Model CVD-42A208X4-NTSC

• 4 Cameras
• 1 Receiver
• 5 Power Supplies (100-240V)
• AV Cable
• Remote Control for Receiver
• Instruction Manual - English

FAQ - Frequently Asked Questions

• Can I transmit the images from the cameras onto the internet, so I can watch the live feed from anywhere in the world
• Yes, you can, but you will need to also purchase either an AV to USB converter or an AV to VGA Out converter. To get your cameras online, simply setup the cameras, use one of the converters mentioned above to connect the wireless receiver to an internet capable computer, and install web camera broadcasting software such as Webcam XP or Xray Vision. This kind of software allows the computer connected to the receiver to host the feed from the cameras on the internet. Then from your home (or anywhere else in the world), you can go online, type in the IP address of the computer that is connected to the receiver, and access the live feed from the cameras. This process is slightly easier with our IP Surveillance Camera with Angle Control and USB Webcam Server (TX-IP001), which does not require a converter and comes with the necessary software.